LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 432 (Automatic Transmission - 10-Speed Automatic Transmission - 10R80 (Diagnosis & Testing)) >> Diagnosis And Testing >> DTC Chart and Pinpoint Tests - Raptor >> Pinpoint Tests >> Pinpoint Test Ad : DTC P1A02

Pinpoint Test Ad : DTC P1A02

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Normal Operation and Fault Conditions 

    The TCM monitors the low one-way clutch application. The low one-way clutch locks to prevent sun gear 1 from rotating backward in gears 1A and 2A.

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    TCM P1A02:00 Transmission One Way Clutch Performance: No Sub Type Information This DTC indicates the low one-way clutch failed to engage gear 1A and/or 2A 3 times, allowing sun gear 1 to rotate backward. When this DTC sets the failsafe logic disables gears 1A and 2A.

    Possible Sources 

    • Low one-way clutch failure

  2. AD1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS)

    • Ignition ON.

    • Using a diagnostic scan tool, clear the DTC for the TCM.

    • Road test the vehicle.

    • Using a diagnostic scan tool, carry out the TCM self-test.

    Did DTC P1A02 return? 

    Yes  Check the low one-way clutch for slipping. REFER to: Low One-Way Clutch Assembly .
    No  The fault is not present at this time and may be intermittent.
scientia non olet · About LEMON Manuals