Pinpoint Test Ac : DTC P2700, P2701, P2702, P2703, P2704, 2705
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
The PCM monitors clutch applications if a non electrical fault is detected for the clutches a DTC is set in memory.
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition PCM P2700:00 Transmission Friction Element "A" Apply Time Range/Performance: No Sub Type Information This DTC illuminates the wrench light in conjunction with either P0751 or P0752. Resolve the more specific DTC first. PCM P2701:00 Transmission Friction Element "B" Apply Time Range/Performance: No Sub Type Information This DTC illuminates the wrench light in conjunction with either P0756 or P0757. Resolve the more specific DTC first. PCM P2702:00 Transmission Friction Element "C" Apply Time Range/Performance: No Sub Type Information This DTC illuminates the wrench light in conjunction with either P0761 or P0762. Resolve the more specific DTC first. PCM P2703:00 Transmission Friction Element "D" Apply Time Range/Performance: No Sub Type Information This DTC illuminates the wrench light in conjunction with either P0766 or P0767. Resolve the more specific DTC first. PCM P2704:00 Transmission Friction Element "E" Apply Time Range/Performance: No Sub Type Information This DTC illuminates the wrench light in conjunction with either P0771 or P0772. Resolve the more specific DTC first. PCM P2705:00 Transmission Friction Element "F" Apply Time Range/Performance: No Sub Type Information This DTC illuminates the wrench light in conjunction with either P2707 or P2708. Resolve the more specific DTC first. Possible Sources
- Clutch stuck on
- Clutch stuck off
- Clutch damaged
- AC1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS)
- Ignition ON.
- Using a diagnostic scan tool, clear the DTC from the PCM.
- Road test the vehicle.
- Using a diagnostic scan tool, carry out the PCM self-test.
Is DTC P2700, P2701, P2702, P2703, P2704 or P2705 present in the PCM?
Yes For P2700, if either DTC P0751 or P0752 are set resolve them first. Otherwise, check the A clutch for a slipping or harsh apply. REFER to: A Clutch . For P2701, if either DTC P0756 or P0757 are set resolve them first. Otherwise, check the B clutch for a slipping or harsh apply. REFER to: B Clutch . For P2702, if either DTC P0761 or P0762 are set resolve them first. Otherwise, check the C clutch for a slipping of harsh apply. REFER to: C Clutch . For P2703, if either DTC P0766 or P0767 are set resolve them first. Otherwise, check the D clutch for a slipping or harsh apply. REFER to: D Clutch . For P2704, if either DTC P0771 or P0772 are set resolve them first. Otherwise, check the E clutch for a slipping or harsh apply. REFER to: E Clutch . For P2705, if either DTC P2707 or P2708 are set resolve them first. Otherwise, check the F clutch for a slipping or harsh apply. REFER to: F Clutch . No The fault is not present at this time and may be intermittent.