Exhaust Gas Recirculation (EGR) Outlet Tube: Removal
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
-
- Remove the engine appearance cover.
 Courtesy of FORD MOTOR COMPANY
|
-
- Disconnect EGR temp sensor connector.
- Remove the wiring retainer.
- Remove the retainer from the timing belt cover.
- Remove the retainers and the EGR outlet tube.
- Remove and discard the gaskets.
 Courtesy of FORD MOTOR COMPANY
|