Exhaust Gas Recirculation (EGR) Outlet Tube: Installation
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
-
- Using new gaskets, install the EGR outlet tube and the bolts.
Torque: 89 lb.in (10 Nm)
- Install the retainer in the timing belt cover.
Torque: 31 lb.in (3.5 Nm)
- Connect the wire retainers.
- Connect the EGR temp sensor connector.
 Courtesy of FORD MOTOR COMPANY
|
-
- Install the engine appearance cover.
 Courtesy of FORD MOTOR COMPANY
|