LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 424 (Electronic Engine Controls - 3.0L Power Stroke Diesel) >> Removal And Installation >> Particulate Matter Sensor >> Installation

Particulate Matter Sensor: Installation

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: If reusing the original sensor, Bostik Never-Seez Regular Grade (nickel free) anti-seize thread-lube needs to be applied. Brush a uniform layer of the recommended nickel free anti-seize to the threads. Take care not to get any lube below the flange of the probe.
    NOTE: Use of anti-seize with nickel could contaminate the sensor.

    To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals