LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 422 (Engine Cooling - 3.0L Power Stroke Diesel) >> Removal And Installation >> Block Heater >> Installation

Block Heater: Installation

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lubricate the O-ring seal with clean engine coolant. Refer to: Specifications .
    GFD462274Courtesy of FORD MOTOR COMPANY
  2. Lubricate the O-ring seal with clean engine coolant. Refer to: Specifications .
    GFD462275Courtesy of FORD MOTOR COMPANY
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals