LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 420 (Engine - 3.0L Power Stroke Diesel (Specifications - Removal)) >> Removal And Installation >> Camshaft Front Seal >> Removal

Camshaft Front Seal: Removal

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles 

  1. Remove the timing belt. Refer to: Timing Belt .
  2. Remove Special Service Tool: 303-1670 Pins, Camshaft Locking.
    GFD461374Courtesy of FORD MOTOR COMPANY

    LH camshaft seal 

  3. NOTE: Note the position of the camshaft pulley prior to removal.

    Remove the bolts and the camshaft pulley.

    GFD461375Courtesy of FORD MOTOR COMPANY
  4. NOTE: Use the original bolts for the special tool.

    Using the special tool, remove the bolt and the camshaft gear hub. Discard the bolt. Use Special Service Tool: 303-1674 Tool, Holding Camshaft Sprocket.

    GFD461376Courtesy of FORD MOTOR COMPANY
  5. Using the special tools, remove and discard the camshaft front seal. Use Special Service Tool: 303-1675 Adapter, Seal Remover., 308-375 Remover, Input Shaft Seal.
    GFD461377Courtesy of FORD MOTOR COMPANY

    RH camshaft seal 

  6. NOTE: Note the position of the camshaft pulley prior to removal.

    Remove the bolts and the camshaft pulley.

    GFD461378Courtesy of FORD MOTOR COMPANY
  7. NOTE: Use the original bolts for the special tool.

    Using the special tool, remove the bolt and the camshaft gear hub. Discard the bolt. Use Special Service Tool: 303-1674 Tool, Holding Camshaft Sprocket.

    GFD461379Courtesy of FORD MOTOR COMPANY
  8. Using the special tools, remove and discard the camshaft front seal. Use Special Service Tool: 303-1675 Adapter, Seal Remover., 308-375 Remover, Input Shaft Seal.
GFD461380Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals