LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 418 (Engine Ignition - 5.0L 32V Ti-VCT) >> Removal And Installation >> Ignition Coil-On-Plug >> Installation

Ignition Coil-On-Plug: Installation

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the ignition coil-on-plug assembly for cracks, rips, or tears. Replace any damaged coil-on-plug assemblies.
    GFD461174Courtesy of FORD MOTOR COMPANY
    1. Install the ignition coil-on-plugs
    2. Install and tighten the ignition coil-on-plug retaining bolts in the following 2 stages.

      Torque: Stage 1: 62 lb.in (7 Nm) | Stage 2: 45°

    GFD462851Courtesy of FORD MOTOR COMPANY
  3. Connect the ignition coil-on-plug electrical connectors.
GFD462850Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals