LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 410 (Automatic Transmission - 10-Speed Automatic Transmission - 10R80 (Removal & Installation - Installation)) >> Removal And Installation >> Transmission Fluid Auxiliary Pump >> Removal

Transmission Fluid Auxiliary Pump: Removal

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: It is not necessary to remove the transmission fluid filter to remove the transmission fluid auxiliary pump.

    Remove the transmission fluid pan and gasket. Refer to: Transmission Fluid Pan, Gasket and Filter . Refer to: Transmission Fluid Pan, Gasket and Filter - Raptor . Refer to: Transmission Fluid Pan, Gasket and Filter - 3.0L Power Stroke Diesel .

  2. Remove the bolt and the transmission fluid auxiliary pump tube.
    GFD464092Courtesy of FORD MOTOR COMPANY
  3. Remove the transmission fluid auxiliary pump tube seal.
    GFD464093Courtesy of FORD MOTOR COMPANY
  4. Disconnect the transmission fluid auxiliary pump.
    GFD464254Courtesy of FORD MOTOR COMPANY
  5. NOTE: A short 1/4" drive T-30 socket is required to remove the rear pump bolt.
    NOTE: The fluid auxiliary pump may need to be removed from the RH side of the vehicle to clear the exhaust system and fluid filter.

    Remove the bolts and the transmission fluid auxiliary pump.

    1. If necessary, remove the fluid auxiliary pump towards the RH side.

GFD464255Courtesy of FORD MOTOR COMPANY