Rear Quarter Panel Moulding: Removal
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- Remove the retainers and the push pins.
Torque: 71 lb.in (8 Nm)
 Courtesy of FORD MOTOR COMPANY
|
-
NOTE:
Use moderate force to avoid breaking retainer clips.
Using a non-marring trim tool, detach the retainers and remove the rear quarter panel moulding.
 Courtesy of FORD MOTOR COMPANY
|