Front Fender Moulding - F-250 F-350: Removal
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
- If equipped with mud flaps. Remove the bolts and clips.
- Remove the bolts.
- Remove the push pins and the retainer.
- Using a non-marring trim tool, disengage the push pin type retainers, trim clips and remove the front fender moulding.