LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Powertrain Secondary Cooling System - 6.7L Power Stroke Diesel) >> Removal And Installation >> Radiator >> Installation

Removal And Installation: Radiator: Installation

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: Only use the specified material to lubricate the seals.

    Install new condenser fitting O-ring seals.

    Material: Motorcraft ® PAG Refrigerant Compressor Oil / YN-12-D (WSH-M1C231-B)

    NOTE: Evaluate the cooling system condition before filling the cooling system. Failure to follow these instructions can damage the engine.
  3. Evaluate the cooling system condition. Refer to: Cooling System Condition Evaluation .
  4. Evacuate and charge the A/C system. Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging .