LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 386 (Climate Control System - General Information (Diagnosis & Testing - Removal & Installation)) >> Removal And Installation >> Climate Control Housing >> Installation

Climate Control Housing: Installation

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: Only use the specified material to lubricate the seals.

    Install and lubricate new O-ring seals. Refer to the appropriate SPECIFICATIONS .

  3. Lubricate the refrigerant system with the correct amount of clean PAG oil. Refer to the appropriate Refrigerant Oil Adding procedure in the appropriate Climate Control System article.
  4. Fill and bleed the cooling system. Refer to filling and bleeding without a vacuum cooling system filler. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding . Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding (303-03B). Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding . Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding . Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .
scientia non olet · About LEMON Manuals