IPC Network Input Messages
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Vehicle mode | BCM | Used by the IPC to display No Key Detected when the START/STOP button is pressed and no programmed key is detected within the vehicle. |
| Ignition status | BCM | Used by the IPC to power up when the START/STOP button is pressed and a programmed key is detected within the vehicle or to power down when the request is to turn the vehicle off. |