LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 374 (Automatic Transmission External Controls) >> Removal And Installation >> Selector Lever Knob >> Removal

Selector Lever Knob: Removal

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the selector lever bezel. Refer to: Selector Lever Bezel .
  2. Shift the selector lever into 1.
    GFD464724Courtesy of FORD MOTOR COMPANY
  3. Disconnect the electrical connector.
    GFD464725Courtesy of FORD MOTOR COMPANY
  4. Remove the screws and the selector lever knob and boot.
    GFD464726Courtesy of FORD MOTOR COMPANY
  5. Remove the selector lever knob from the boot.
GFD464727Courtesy of FORD MOTOR COMPANY