Pinpoint Test J : The Front Camera Washer Is Inoperative
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
- J1 CHECK THE WINDSHIELD WASHER OPERATION
- Ignition ON.
- Momentarily activate the windshield washer function.
Does the windshield washer operate?
Yes GO to J2 No GO to Pinpoint Test H - J2 CHECK FOR WASHER SOLVENT TO THE FRONT CAMERA WASHER JET
- Ignition OFF.
- Disconnect the washer hose from the front camera washer jet and place it in a container to capture fluid.
- Ignition ON.
- Momentarily activate the windshield washer function.
Is washer fluid emitted at the washer hose?
Yes INSTALL a new front camera washer jet. No INSTALL a new front camera washer hose.