Valve Tappets: Removal

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Remove the RH cylinder head or LH cylinder head. Refer to: Cylinder Head RH . Refer to: Cylinder Head LH .
NOTE: To prevent engine damage, keep the valve tappets in the order in which they were removed. Install all valve tappets back in their original positions or engine damage may occur.

NOTE: Only one cylinder shown.

NOTE: Always keep the valve tappets in the upright position or the hydraulic lash adjuster may fall out.

NOTE: Some valve tappets will be removed with the valve tappet guides.

Remove the valve tappet guide(s).

Courtesy of FORD MOTOR COMPANY
NOTE: Always keep the valve tappets in the upright position or the hydraulic lash adjuster may fall out.

Remove the valve tappets from the engine.

Courtesy of FORD MOTOR COMPANY