Cylinder Head Cleaning
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
For information on Ford Color Coded Illustrations refer to OEM Color Coding .
Special Tool(s) / General Equipment
| Plastic Scraper |
|---|
Materials
| Name | Specification |
|---|---|
| Motorcraft ® Silicone Gasket Remover ZC-30-A | - |
| Motorcraft ® Metal Surface Prep Wipes ZC-31-B | - |
Cleaning
-
NOTE: Do not clean the cylinder heads with steel scrapers or blades, which can cause scratches or gouges that result in leak paths. Also, do not use rotary abrasive tools including: pads, disc, wire brushes, sand paper or emery cloth. These products can alter the surface finish of the head, adversely affecting the combustion chamber sealing.NOTE: Aluminum surfaces are soft and can be scratched easily. Never place the cylinder head gasket surface, unprotected, on a bench surface.NOTE: If there is no residual gasket material present, metal surface prep can be used to clean and prepare the surface.
Remove any large deposits of silicone or gasket material with a plastic scraper. Use the General Equipment: Plastic Scraper
-
- Apply the silicone gasket remover as follows:
- Apply liberally on the surface and let stand for several minutes to soften the gasket material.
Material: Motorcraft ® Silicone Gasket Remover / ZC-30-A
- Allow longer contact time for thick layers.
-
- Remove the silicone gasket remover with a plastic scraper. Use the General Equipment: Plastic Scraper
- A second application of silicone gasket remover may be required if residual traces of gasket material remain.
Material: Motorcraft ® Silicone Gasket Remover / ZC-30-A
-
NOTE: Do not attempt to make the metal shiny. Some staining of the metal surfaces is normal.
Apply metal surface prep, to remove any remaining traces of oil or coolant, and to prepare the surfaces to bond with the new gasket.
Material: Motorcraft ® Metal Surface Prep Wipes / ZC-31-B