LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 368 (Parking Aid - Vehicles With: Rear Parking Aid) >> Removal And Installation >> Rear Parking Aid Sensor >> Removal

Rear Parking Aid Sensor: Removal

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles 

  1. Raise the vehicle on a hoist. Refer to: Jacking and Lifting - Overview .

    Inner rear parking aid sensors 

  2. NOTE: On both sides.

    Remove the inner rear parking aid sensor.

    1. Disconnect the inner rear parking aid sensor electrical connector.
    2. Release the tabs.
    3. Slide the inner rear parking aid sensor out of the bracket.

    GFD465727Courtesy of FORD MOTOR COMPANY

    Outer rear parking aid sensors 

  3. Remove the muffler and tailpipe assembly. Refer to: Muffler and Tailpipe .
  4. NOTE: On both sides.

    Remove the outer rear parking aid sensor.

    • Disconnect the outer rear parking aid sensor electrical connector.

    • Release the tabs.

    • Slide the outer rear parking aid sensor out of the bracket.

GFD465728Courtesy of FORD MOTOR COMPANY