Pinpoint Test Y : DTC: U0208:00: Notes
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Module Communications Network for schematic and connector information.
Normal Operation and Fault Conditions
The SCMG/ SCMH and DSM communicate using the MS-CAN.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0208:00 | Lost Communication With "Seat Control Module A": No Sub Type Information | Set by the SCMG/ SCMH whenever it has lost communication to the DSM for 5 seconds or longer while the SCMG/ SCMH input voltage is between 10 and 15.5 volts. |
Possible Causes
- Module communication
- SCMG/ SCMH
- DSM