Network Message Chart
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Module Network Input Messages - IPC
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Adaptive cruise control warning request | CCM / IPMA (with pre-collision assist) | Input used to control the adaptive cruise control warning chime. |
| Brake chime request | ABS module | Input used for the service AdvanceTrac® chime. |
| Cruise control status | PCM | Input used to control the adaptive cruise control warning chime. |
| Cross traffic alert left status | SODL | Input used to control the BLIS/ CTA warning chime. |
| Cross traffic alert right status | SODR | Input used to control the BLIS/ CTA warning chime. |
| Diesel exhaust fluid contaminated | PCM | Input used for the diesel exhaust fluid level warning chime. |
| Diesel exhaust fluid level range indicator | PCM | Input used for the diesel exhaust fluid level warning chime. |
| Diesel exhaust fluid message display | PCM | Input used for the diesel exhaust fluid level warning chime. |
| Diesel exhaust fluid warning indicator | PCM | Input used for the diesel exhaust fluid level warning chime. |
| Diesel exhaust over-temperature | PCM | Input used for the exhaust system over-temperature warning chime. |
| Driver door ajar status | BCM | Input used for the ignition-engine on chime and the PRNDL not in park warning chime. |
| Driver seatbelt buckle status | RCM | Input used to control the Belt-Minder® warning chime and the seat belt warning chime. |
| Forward collision chime request | CCM / IPMA (pre-collision assist) | Input used for the confirmation chime portion of the forward collision warning chime. |
| Forward collision warning message request | CCM / IPMA (pre-collision assist) | Input used for the forward collision warning chime. |
| Front passenger detect status | RCM | Input used to control the Belt-Minder® warning chime. |
| Gear lever position | PCM | Input used to control the Belt-Minder® warning chime. |
| Headlamp high/low status | BCM | Input used to control the headlamps on warning chime |
| Ignition status | BCM | Input used to control the PRNDL not in park warning chime. |
| Key-in-ignition status | BCM | Input used to control the key-in-ignition warning chime. |
| Lane keeping alert warning chime request | IPMA | Input used to control the lane keeping alert (hands off steering wheel) warning chime. |
| Left turn lamp on request | BCM | Input used for the turn signal on tick-tock chime tone. |
| Memory feedback request | DSM | Input used to control the memory feedback confirmation chime. |
| Parking aid chime request | PAM | Input used to control the parking aid warning chime. |
| Parking brake chime request | BCM | Input used to control the parking brake warning chime. |
| Passenger seatbelt buckle status | RCM | Input used to control the Belt-Minder® warning chime. |
| Perimeter alarm chime request | BCM | Input used to control the perimeter alarm warning chime. |
| Power pack status | PCM | Input used for the ignition-engine on warning chime. |
| Right turn lamp on request | BCM | Input used for the turn signal on tick-tock chime tone. |
| Side obstacle sensor status-left | SODL | Input used to control the BLIS/ CTA warning chime. |
| Side obstacle sensor status-right | SODR | Input used to control the BLIS/ CTA warning chime. |
| Transmission gear display mode | PCM | Input used for the ignition-engine on warning chime and the PRNDL not in park warning chime. |
| Transport mode | BCM | Input used to control the PRNDL not in park warning chime. |
| Turn signal switch status | SCCM | Input used for the turn signal left on warning chime. |
| Odometer count | PCM | Input used for the turn signal left on warning chime. |
| Vehicle speed | PCM | Input used to control the Belt-Minder® warning chime, the PRNDL not in park warning chime and the turn signal tick-tock chime tone. |
Module Network Input Messages - ACM and DSP
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Belt-Minder® audio mute | IPC | Input from the IPC used to control the Belt-Minder® audio chime output. |
| Chime source | IPC | Input used to configure the chime source (IPC or the audio system). |
| IPC chime request | IPC | Input from the IPC used to control the audio chime output. |
| Power up chime modules | IPC | Input used to initiate the audio system as the chime source. |