Brake Pedal and Bracket: Installation

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles

NOTE: Do not press, pull or otherwise move the brake pedal while installing the stoplamp switch. Install this switch with the booster push rod attached to the brake pedal and with the brake pedal in the at-rest position. Installing this switch with the pedal in any other position results in incorrect adjustment and damages the switch.

To install, reverse the removal procedure. Refer to: Stoplamp Switch .

Vehicles equipped with adjustable pedals
Index the pedal assemblies. Refer to: Adjustable Pedal Indexing .