Module Network Input Messages - DSM
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Personality recall | BCM | This message is sent to the GWM and then to the DSM. When the personality recall command is received, the DSM stores or recalls the associated memory seat position (1, 2 or 3). If a RKE transmitter has been programmed to a memory position, this input is used to recall the associated memory position. |
| Memory set switch status | DDM | When the memory set switch (1, 2 or 3) is activated, the DDM sends this message to the DSM, which then stores or recalls the associated memory position. |