Pinpoint Test J : DTCS P0562:00 Or P0563:00: Notes
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Refer to TWO WHEEL DRIVE/FOUR WHEEL DRIVE SYSTEMS for schematic and connector information.
Normal Operation and Fault Conditions
If the TCCM observes an overpower or a low voltage condition, a DTC is set and all TCCM outputs are turned off (IWEs engaged).
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| P0562:00 | Battery Voltage Low: No Sub Type Information | This DTC sets when the TCCM detects battery voltage less than 9 volts for 5 seconds or more at TCCM. |
| P0563:00 | Battery Voltage High: No Sub Type Information | This DTC sets when the TCCM detects battery voltage greater than 16 volts for 5 seconds or more at TCCM. |
Possible Sources
- Fuse
- Wiring, terminals or connectors
- TCCM