General Specifications
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Specification |
|---|---|
| Available drive pinion bearing adjustment shim in steps of 0.025 mm (0.001 in) | 0.381-1.219 mm (0.010-0.038 in) |
| Maximum axle shaft flange runout | 0.076 mm (0.003 in) |
| Maximum pinion flange runout | 0.279 mm (0.011 in) |
| Pinion bearing rotational preload | 1.8-3.3 Nm (16-29 lb-in) |
| Ring gear backlash | 0.203-0.304 mm (0.008-0.012 in) |