LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 333 (Vehicle Dynamic Suspension) >> Diagnosis And Testing >> Vehicle Dynamic Suspension >> Pinpoint Tests >> Pinpoint Test Q : U0415:00

Pinpoint Test Q : U0415:00

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Normal Operation and Fault Conditions 

    REFER to: Vehicle Dynamic Suspension - System Operation and Component Description .

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    VDM U0415:00 Invalid Data Received from Anti-Lock Brake System (ABS) Control Module "A": No Sub Type Information Sets in continuous memory when the VDM receives invalid network data from the ABS module.

    Possible Sources 

    • Network communication concern
    • ABS module concern

  2. Q1 CHECK THE ABS (ANTI-LOCK BRAKE SYSTEM) MODULE DIAGNOSTIC TROUBLE CODES (DTCS)

    • Ignition ON.

    • Using a diagnostic scan tool, check the ABS module Diagnostic Trouble Codes (DTCs).

    Are any Diagnostic Trouble Codes (DTCs) present in the ABS module? 

    Yes  DIAGNOSE the ABS module Diagnostic Trouble Codes (DTCs). REFER to: Anti-Lock Brake System (ABS) and Stability Control .
    No  DIAGNOSE the observable symptom. If there is no observable symptom, DISREGARD this DTC.