Pinpoint Test BJ : The Brake Applied - Power Reduced Message Or The Check Fuel Fill Inlet Message Is Never Or Always Displayed: Notes
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
For the brake applied - power reduced message
See Brake Applied - Power Reduced Message. Refer to: Message Center - System Operation and Component Description .
- If the brake pedal applied message request is missing for less than 5 seconds, the IPC defaults the brake pedal applied - power reduced message center message to the last indication state, based upon the last message received.
- If the brake pedal applied message request is missing for 5 seconds or longer, the IPC defaults the brake pedal applied - power reduced message center message off.
For the check fuel fill inlet message
See Check Fuel Fill Inlet Message. Refer to: Message Center - System Operation and Component Description .
- If the check fuel fill inlet message request is missing for less than 5 seconds, the IPC defaults the check fuel fill inlet message center message to the last indication state, based upon the last message received.
- If the check fuel fill inlet message request is missing for 5 seconds or longer, the IPC defaults the check fuel fill inlet message center message off.
Possible Sources
- Evaporative emissions system concern
- GWM concern
- PCM concern
- IPC