Stability - Traction Control
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
The message center provides stability-traction control system messages to indicate the stability-traction control system status or if the stability-traction control system has a fault and requires service.
When the stability-traction control system has been selected off or on, the ABS module sends the stability-traction control on/off message request to the GWM over the HS-CAN2. The GWM sends the stability-traction control on/off message request to the IPC over the HS-CAN3.
When a fault condition exists in the stability-traction control system, the ABS module sets a DTC and sends the stability-traction control chime request to the GWM over the HS-CAN2. The GWM sends the stability-traction control chime request to the IPC over the HS-CAN3.