Brake System
The message center provides brake system warning messages for the following concerns and status:
- Low brake fluid level
- Parking brake status and faults
- ABS faults
The IPC receives all network messages required to operate the brake warning indicator from the GWM over the HS-CAN3.
When a base brake system fault exists, the ABS module sends the brake (red) warning indicator request to the GWM over the HS-CAN2 to display the check brake system message center warning.
When the parking brake is applied, the BCM sends the brake chime request to the GWM over the HS-CAN1 to display the parking brake engaged message center warning.
When a low brake fluid level condition exists, the BCM sends the brake fluid level low message request to the GWM over the HS-CAN1 to display the brake fluid level low message center warning.