Pinpoint Test J : B11D9:17: Notes
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Power Distribution for schematic and connector information.
Normal Operation and Fault Conditions
The SCCM continuously monitors input voltage for correct operation. If voltage outside of defined limits is detected by the SCCM, the applicable DTC sets. DTC B11D9:17 can set if the vehicle has been recently jump started or the vehicle battery has been recently charged.
SCCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B11D9:17 | Vehicle Battery: Circuit Above Threshold | Sets in continuous memory if the SCCM detects battery voltage above 19 volts on the battery voltage supply circuit. |
Possible Causes
- Wiring, terminals or connectors
- Charging system
- SCCM