LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 326 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Ignition Lock Cylinder >> Installation

Ignition Lock Cylinder: Installation

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Install the ignition lock cylinder.

    1. Make sure the ignition lock cylinder is in the ACC position.
    2. Insert the ignition lock cylinder into the ignition lock cylinder housing located on the steering column. Make sure to align the locking pin with the locking pin access hole.
    3. Rotate the ignition key through all lock cylinder positions to check for correct operation

scientia non olet · About LEMON Manuals