Hood Latch Release Handle: Removal

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

NOTE: Regular cab shown, Supercrew and Supercab similar.

Remove the scuff plate.

Courtesy of FORD MOTOR COMPANY
Remove the kick panel.

Courtesy of FORD MOTOR COMPANY
Remove the hood latch release handle.
1. Remove the bolt from the hood latch release handle.
  Torque: 80 lb.in (9 Nm)
2. Remove the hood latch release cable from the hood latch release handle retaining bracket.
3. Remove the hood latch release cable end from the hood latch release handle.

Courtesy of FORD MOTOR COMPANY