Door Latch Lubrication: Activation
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Typical left front door shown, others similar.
- Open the door.
- Using a flat blade screwdriver, fully close the latch (2 clicks). Use the General Equipment: Flat-Bladed Screwdriver
-
NOTE: Do not over-lubricate the latch. Using excessive grease may damage the internal lock motor.
Spray the multi-purpose grease into the opening on the door latch for approximately 5 seconds.
Material: Motorcraft® Multi-Purpose Grease Spray / XL-5-A (ESB-M1C93-B)
-
NOTE: Some exterior door handles are operated mechanically while other exterior door handles are operated electronically.
Open the latch using the exterior door handle.
- Open and close the door several times to circulate the lubricant inside the latch.
- Open the door.
- Wipe off any excess grease.