Fuel System
WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
The fuel tank and lines consist of the:
- single container fuel tank.
- fuel and vapor lines in an integrated bundle assembly.
- quick connect fuel and vapor tube couplings.
- easy Fuel (capless) fuel tank filler pipe assembly, which cannot be modified in any way and is serviced only by the installation of a new fuel tank filler pipe assembly.
- a Fuel Pump Control Module (FPCM).
- FPDM
- closed Loop Pressure Control (CLPC) system.
- a Fuel Pump (FP) module containing:
- the electric FP module which provides pressurized fuel to the high pressure Fuel Pump (FP).
- the fuel level sender.
- a check valve which maintains system pressure after the pump is shut off.
- a pressure relief for overpressure protection in the event of restricted fluid flow.
- a lifetime fuel filter providing filtration to protect the fuel injectors from foreign material.
The vehicle:
- has a serviceable fuel level sender mounted on the fuel pump module.
- has a fuel tank filler pipe which contains a misfuel inhibitor device to permit only unleaded fuel to be pumped into the fuel tank.
- has an Easy Fuel (capless) fuel tank filler pipe assembly, which cannot be modified in any way.
- has a lifetime in tank fuel filter serviced as part of the fuel pump.
- has fuel tubes (liquid and vapor) combined in a bundle.
- has quick connect fuel tube couplings.
- has a FPDM that shuts off fuel in the event of a collision.