LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Automatic Transmission - 6-Speed Automatic Transmission - 6R140) >> Removal And Installation >> Transmission Internal Wiring Harness >> Removal

Transmission Internal Wiring Harness: Removal

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission fluid pan. Refer to: Transmission Fluid Pan .
  2. Rotate the shell of the transmission vehicle harness connector counterclockwise and disconnect the transmission vehicle harness connector.
    GFD204694Courtesy of FORD MOTOR COMPANY
  3. Disconnect the selector lever cable end from the manual control lever.
    GFD204544Courtesy of FORD MOTOR COMPANY
  4. Move the manual control lever counterclockwise to the LOW position.
    GFD204695Courtesy of FORD MOTOR COMPANY
  5. Disconnect the electrical connectors and position the transmission wiring harness aside.

    1. Solenoids.
    2. TFT sensor.
    3. TR sensor.
    4. OSS sensor.
    5. TSS sensor.

    GFD204690Courtesy of FORD MOTOR COMPANY
  6. Compress the black tabs and push the wiring harness bulkhead through the transmission case and remove the transmission wiring harness (7G276).
GFD204696Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals