Pinpoint Test A : Transmission Control Solenoids: Notes
Refer to Transmission Controls - TorqShift 6 for schematic and connector information.
Normal Operation
When the electrical connector or solenoid body is disconnected, inspect the connector for terminal condition, corrosion and contamination. Also inspect the connector seal for damage. Clean, repair or install new components as required. Power is routed through the Transmission Solenoid Power Control (TSPC) relay (inside the PCM) to all transmission solenoids. If the power circuit to the transmission solenoids or the TSPC relay fails open, then all solenoids are failed electrically OFF. CHECK for open, short to ground or the transmission connector disconnected. The TSPC relay disables power to the transmission solenoids when certain transmission DTCs are set