Removal And Installation: Fender: Installation
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
LH side shown, RH side similar.
- Using the fender locator pins to position, install the fender and the pushpin retainers.
- Install the retainer clips and from back side of the pickup box panel, install the nuts.
Torque: 80 lb.in (9 Nm)
- Install the fender brackets bolts and push pins.
Torque: 80 lb.in (9 Nm)
- Install the lower fender fasteners.
Torque: 80 lb.in (9 Nm)
- Reposition and install the wiring harness retainers and connect the marker lights.
- Install the fender splash shield and retainers.
- Check the lighting for normal operation.