Turbocharger Actuator: Installation

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Inspect the turbocharger actuator O-ring seals to make sure they are not twisted or distorted. Apply clean engine oil to the O-ring seals prior to installing.

To install, reverse the removal procedure.
Material: Motorcraft ® SAE 10W-30 Super Duty Diesel Motor Oil / XO-10W30-QSD (WSS-M2C171-E)