Crankshaft Position (CKP) Sensor: Installation

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Reset/clear the specified function for the crankshaft position sensor.

NOTE: Clear the continuous PCM DTCs and reset the emissions monitors information in the PCM. Refer to Engine Controls - Diagnostic Methods (Diesel) .

To install, reverse the removal procedure.