Oil Level Indicator and Tube: Installation

WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Lower oil level indicator tube

Install the lower oil level indicator tube and bolts.
Torque: 89 lb.in (10 Nm)

Courtesy of FORD MOTOR COMPANY

Upper oil level indicator tube
NOTE: Apply clean engine oil to the O-ring seals.

Install new O-ring seals.

Material: Motorcraft® SAE 10W-30 Super Duty Diesel Motor Oil / XO-10W30-QSDF (WSS-M2C171-F1)

Courtesy of FORD MOTOR COMPANY
NOTE: Position the oil level indicator tube under the transmission filler tube.

NOTE: Verify that the oil level indicator tube is bottomed in the rear engine cover.
- Position the oil level indicator tube in the vehicle.
- From below, align the oil level indicator tube into the engine rear cover.
- Install the oil level indicator tube nut and bolt.
  Torque: 89 lb.in (10 Nm)
Courtesy of FORD MOTOR COMPANY
Install the oil level indicator.

Courtesy of FORD MOTOR COMPANY
Position back the transmission oil level indicator tube and install the bolt.
Torque: 97 lb.in (11 Nm)

Courtesy of FORD MOTOR COMPANY