Oil Cooler: Installation
WARNING: This page is about a different car, the 2019 Ford F-350 Super Duty and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Install the engine oil cooler and the retainer.
Torque: 43 lb.ft (58 Nm)
-
- Connect the coolant hoses.
- Remove the hose locking pliers. Use the General Equipment: Locking Pliers
-
NOTE: Lubricate the oil filter gasket with clean engine oil.
Install a new oil filter.
- Fill the engine with clean engine oil. Refer to: Specifications .
- Inspect and adjust the coolant level in the degas bottle. Refer to: SPECIFICATIONS