BCM DTC Fault Trigger Conditions
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B10D7:05 | PATS Key: System Programming Failure | Sets when a PATS key is not successfully programmed into the BCM. |
Possible Causes
- PATS key not programmed
Visual Inspection and Diagnostic Pre-checks
- Inspect the PATS key for damage.
- Verify the correct key is used.