Pinpoint Test B : Outer Edge, Shoulder Wear

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

B1 MEASURE THE TREAD DEPTH

Using a tread depth gauge or similar tool, measure the outside edge/shoulder tread depth.

Is the tread depth greater than 1.588 mm (0.0625 in) ?

Yes	ROTATE the wheel and tire assemblies. CHECK and ADJUST the toe to nominal -0.15 degrees (toe out). CHECK and ADJUST caster and camber to nominal. REFER to: Front Camber and Caster Adjustment - F-250/F-350, RWD . or REFER to: Front Camber and Caster Adjustment - F-250/F-350/F-450/F-550, 4WD .

No	INSTALL a new tire(s). CHECK and ADJUST the toe to nominal. CHECK and ADJUST caster and camber to nominal. REFER to: Front Camber and Caster Adjustment - F-250/F-350, RWD . or REFER to: Front Camber and Caster Adjustment - F-250/F-350/F-450/F-550, 4WD .