Pinpoint Test H : The Transmission Does Not Change Ranges With The Selector Lever

WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Normal Operation and Fault Conditions
- Selector lever cable disconnected
  - REINSTALL the selector lever cable. REFER to: Selector Lever Cable - 6-Speed Automatic Transmission - 6R100 . REFER to: Selector Lever Cable - 6-Speed Automatic Transmission - 6R140 .
- Selector lever cable broken
  - Verify the selector lever cable is attached to the selector lever mechanism. Disconnect the selector lever cable from the transmission manual lever. Push and pull on the end of the cable. If the cable moves independently of the selector lever, INSTALL a new selector lever cable. REFER to: Selector Lever Cable - 6-Speed Automatic Transmission - 6R100 . REFER to: Selector Lever Cable - 6-Speed Automatic Transmission - 6R140 .
Possible Sources
- Selector lever cable
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods