LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 206 (Roof Opening Panel - Vehicles With: Roof Opening Panel) >> Description And Operation >> Roof Opening Panel - System Operation and Component Description >> Roof Opening Panel System Function

Roof Opening Panel System Function

WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

The roof opening panel motor is hard wired to both the BCM and the roof opening panel control switch. The only function of the BCM is to provide battery voltage and accessory delay voltage to the roof opening panel motor. The roof opening panel control switch is hard wired to the roof opening panel motor with a roof opening panel open circuit, roof opening panel close circuit and a tilt/vent switch circuit. When the roof opening panel control switches are pressed, a ground signal is sent to the roof opening panel motor to activate the respective switch request.

scientia non olet · About LEMON Manuals