Selector Shaft Seal: Installation
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate a new manual shaft seal with clean transmission fluid and install it in the transmission case.
Material
Motorcraft® MERCON® LV Automatic Transmission Fluid / XT-10-QLVC (WSS-M2C938-A) (MERCON® LV,)
- Install the manual control lever and the nut.
Torque:
18 lb.ft (24 Nm)
- Connect the selector lever cable end to the manual control lever.
- Check the transmission fluid level. Refer to: Transmission Fluid Level Check .