LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 195 (Automatic Transmission, Transfer Case And Power Transfer Unit - 6-Speed Automatic Transmission - 6R140 (2 Of 2)) >> Removal And Installation >> Output Shaft Seal - Vehicles With: Slip Yoke >> Removal

Output Shaft Seal - Vehicles With: Slip Yoke: Removal

WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear driveshaft. Refer to: Rear Driveshaft .
  2. Using the special tool, remove and discard the output shaft seal (7052). Use Special Service Tool: 307-309 Remover, Torque Converter Seal., 100-001 (T50T-100-A) Slide Hammer.
GFD408778Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals