Wheel and Tire - Vehicles With: Single Rear Wheels: Removal
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
-
NOTE: Typical wheel cover shown, others may vary by application.
If equipped. Remove the wheel cover.
- Check the torque for all of the wheel nuts. If any wheel nuts have a torque above 312 Nm (230 lb-ft), install all new wheel studs on that wheel hub. For additional information, Refer to the appropriate information in Suspension System for the procedure.
- With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
-
NOTE: Do not use heat to loosen a seized wheel nut or damage to the wheel and wheel bearing can occur.
Remove the wheel nuts and the wheel and tire assembly.