Pinpoint Test A : Inner Edge, Shoulder Wear
WARNING: This page is about a different car, the 2019 Ford F-550 Super Duty, 2019 Ford F-450 Super Duty, 2019 Ford F-350 Super Duty, and 2019 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- A1 MEASURE THE TREAD DEPTH
- Using a tread depth gauge or similar tool, measure the inside edge/shoulder tread depth.
Is the tread depth greater than 1.588 mm (0.0625 in) ?
Yes ROTATE the wheel and tire assemblies. No CHECK and ADJUST the toe to nominal +0.15 degrees (toe in). CHECK and ADJUST caster and camber to nominal. REFER to: Front Camber and Caster Adjustment - F-250/F-350, RWD . or REFER to: Front Camber and Caster Adjustment - F-250/F-350/F-450/F-550, 4WD .