Vibrate Software

Vibrate Software is a diagnostic aid which will assist in pinpointing the source of unacceptable vibrations. The engine's crankshaft is the point of reference for vibration diagnosis. Every rotating component will have an angular velocity that is faster, slower or the same as the engine's crankshaft. Vibrate Software® calculates the angular velocity of each component and graphically represents these velocities on a computer screen and on a printed vibration worksheet. The following steps outline how Vibrate Software® helps diagnose a vibration symptom:

• Enter the vehicle information. Vibrate will do all the calculations and display a graph showing tire and driveline vibrations.
• Print a Vibration Worksheet graph. The printed graph is to be used during the road test.
• Road test the vehicle at the speed where the vibration is most noticeable. Record the vibration frequency RPM and the engine RPM on the worksheet graph. The point on the graph where the vibration frequency RPM reading and the engine RPMreading intersect indicates the specific component group causing the symptom.
  • A frequency measurement tool capable of measuring vibration frequency and RPM will be needed.

• Provides graphics of diagnostic procedures to aid in testing components.